型号LM2901EP
品牌
分类比较器
描述低功耗低失调电压四路比较器
相关操作
产品概述

参数

Product type Amplifiers
Die or wafer type Wafer Sale
Rating Military
Operating temperature range (°C) -40 to 85

封装 | 引脚 | 尺寸

WAFERSALE (YS) — —

特性

  • Wide Supply Voltage Range
  • LM2901: 2 to 36 VDCor ±1 to ±18 VDC
  • Very Low Supply Current Drain (0.8 mA) — Independent of Supply Voltage
  • Low Input Biasing Current: 25 nA
  • Low Input Offset Current: ±5 nA
  • Offset Voltage: ±3 mV
  • Input Common-Mode Voltage Range Includes GND
  • Differential Input Voltage Range Equal to the Power Supply Voltage
  • Low output saturation voltage: 250 mV at 4 mA
  • Output Voltage Compatible with TTL, DTL, ECL, MOS and CMOS Logic Systems

Advantages

  • High Precision Comparator
  • Reduced VOS Drift Over Temperature
  • Eliminates Need for Dual Supplies
  • Allows Sensing Near GND
  • Compatible with all Forms of Logic
  • Power Drain Suitable for Battery Operation

All trademarks are the property of their respective owners.

说明

The LM2901EP consists of four independent precision voltage comparators with an offset voltage specification as low as 2 mV max for all four comparators. These were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. This comparator also has a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage.

Application areas include limit comparators, simple analog to digital converters; pulse, squarewave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates. The LM2901EP was designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, it will directly interface with MOS logic— where the low power drain of the LM2901EP is a distinct advantage over standard comparators.

ENHANCED PLASTIC

  • Extended Temperature Performance of −40°C to +85°C
  • Baseline Control - Single Fab & Assembly Site
  • Process Change Notification (PCN)
  • Qualification & Reliability Data
  • Solder (PbSn) Lead Finish is standard
  • Enhanced Diminishing Manufacturing Sources (DMS) Support