型号INA129-EP
品牌
分类仪表放大器
描述增强型产品精密低功耗仪表放大器
相关操作
产品概述

参数

Number of channels 1
Vs (max) (V) 36
Vs (min) (V) 4.5
Input offset (±) (max) (µV) 100
Voltage gain (min) (V/V) 1
Voltage gain (max) (V/V) 10000
Noise at 1 kHz (typ) (nV√Hz) 8
Features Current Feedback, Overvoltage protection
CMRR (min) (dB) 113
Input offset drift (±) (max) (V/°C) 0.00015
Input bias current (±) (max) (nA) 8
Iq (typ) (mA) 0.7
Bandwidth at min gain (typ) (MHz) 1.3
Gain error (±) (max) (%) 0.65
Operating temperature range (°C) -55 to 125
Rating HiRel Enhanced Product
Type Resistor
Gain nonlinearity (±) (max) (%) 0.0055
Output swing headroom (to negative supply) (typ) (V) 0.8
Output swing headroom (to positive supply) (typ) (V) -0.9
Input common mode headroom (to negative supply) (typ) (V) 1.7
Input common mode headroom (to positive supply) (typ) (V) -1.4
Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.2

封装 | 引脚 | 尺寸

SOIC (D) 8 29.4 mm² 4.9 x 6

特性

  • Low Offset Voltage
  • Low Input Bias Current
  • High CMR: 95 dB (Typical)
  • Inputs Protected to ±40 V
  • Wide Supply Range: ±2.25 V to ±18 V
  • Low Quiescent Current: 2 mA (Typical)
  • APPLICATIONS
    • Bridge Amplifier
    • Thermocouple Amplifier
    • RTD Sensor Amplifier
    • Medical Instrumentation
    • Data Acquisition
    • Supports Extreme Temperature Applications:
      • Controlled Baseline
      • One Assembly and Test Site
      • One Fabrication Site
      • Available in Military (–55°C to +125°C)
        Temperature Range(1)
      • Extended Product Life Cycle
      • Extended Product-Change Notification
      • Product Traceability

(1) Custom temperature ranges available
All other trademarks are the property of their respective owners

说明

The INA129-EP device is a low power, general-purpose instrumentation amplifier offering excellent accuracy. The versatile 3-op amp design and small size make the device ideal for a wide range of applications. Current-feedback input circuitry provides wide bandwidth even at high gain (200 kHz at G = 100).

A single external resistor sets any gain from 1 to 10,000. The INA129-EP provides an industry-standard gain equation; the INA129-EP gain equation is compatible with the AD620.

The INA129-EP device is laser trimmed for very low offset voltage, drift, and high common-mode rejection (113 dB at G ≥ 100). It operates with power supplies as low as ±2.25 V, and quiescent current is only 750 µA–ideal for battery operated systems. Internal input protection can withstand up to ±40 V without damage.

The INA129-EP is available in a 8-Pin SOIC surface-mount package specified for the –55°C to 125°C temperature range.