首页 Texas Instruments(德州仪器) 全差分放大器 THS4503-EP
型号THS4503-EP |
品牌 |
分类全差分放大器 |
描述增强型产品宽带低失真全差分放大器 |
|
产品概述参数 Number of channels | 1 | Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 4.5 | Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 15 | BW at Acl (MHz) | 370 | Acl, min spec gain (V/V) | 1 | Slew rate (typ) (V/µs) | 2800 | Architecture | Bipolar, Fully Differential ADC Driver | Vn at flatband (typ) (nV√Hz) | 6.8 | Iq per channel (typ) (mA) | 23 | Rail-to-rail | No | Vos (offset voltage at 25°C) (max) (mV) | 6 | Operating temperature range (°C) | -55 to 125, -55 to 60 | Iout (typ) (mA) | 120 | 2nd harmonic (dBc) | 83 | 3rd harmonic (dBc) | 97 | Frequency of harmonic distortion measurement (MHz) | 8 | GBW (typ) (MHz) | 300 | Input bias current (max) (pA) | 4600000 | CMRR (typ) (dB) | 80 | Rating | HiRel Enhanced Product |
封装 | 引脚 | 尺寸 HVSSOP (DGN) | 8 | 14.7 mm² 3 x 4.9 |
特性 - Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
- Enhanced Diminishing Manufacturing Sources (DMS) Support
- Enhanced Product-Change Notification
- Qualification Pedigree(1)
- Fully Differential Architecture
- Bandwidth: 370 MHz
- Slew Rate: 2800 V/µs
- IMD3: .95 dBc at 30 MHz
- OIP3: 51 dBm at 30 MHz
- Output Common-Mode Control
- Wide Power Supply Voltage Range: 5 V, ±5 V, 12 V, 15 V
- Centered Input Common-Mode Range
- Evaluation Module Available
说明 The THS4503 is a high-performance fully differential amplifier from Texas Instruments. The THS4503, without power-down capability, set new performance standards for fully differential amplifiers with unsurpassed linearity, supporting 14-bit operation through 40 MHz. Package options include the 8-pin MSOP with PowerPAD™ for a smaller footprint, enhanced ac performance, and improved thermal dissipation capability. WARNING: The THS4503 may have low-level oscillation when the die temperature (also known as the junction temperature) exceeds 60°C. These devices are not recommended for new designs where the die temperature is expected to exceed 60°C. For more information, see Maximum Die Temperature to Oscillation. |