型号1ED3860MC12M
品牌
分类栅极驱动 IC
描述
相关操作
产品概述

6 A, 5.7 kV single-channel highly flexible isolated gate driver with I2C configurability for DESAT, Soft-Off, UVLO, Miller clamp, TLTO, and Fault. UL 1577 & VDE 0884-11 certified

EiceDRIVER™ Enhancedsingle-channel highly flexibleisolated gate driverwith ±6 A typical sinking and sourcing peak output current in small space-saving DSO-16 fine pitch wide-body package with large creepage distance (>8 mm) forIGBTs,MOSFETsandSiC MOSFETs.

1ED3860MC12M belongs to the EiceDRIVER™ Enhanced 1ED38xx family (X3 Digital family) – single-channel isolated gate driver with adjustable control and protection functions including DESAT, Soft-Off, UVLO, Miller clamp, two level turn off (TLTO), and Fault, to simplify the design of highly reliable systems. All parameter adjustments are done from the input side via the I2C interface (pin SDA and SCL). 1ED3860 is suitable for IGBTs, SiC and Si MOSFETs.

The digitally configurable approach enable customers for predictive maintenance in sophisticated industrial systems. For example, 1ED38xx is able to register the counts of UVLO spikes, monitor the supply voltage and temperature increase. With the long-term analysis of the collected data, customers are able to decide when is the best time to schedule a maintenance cycle before the system fails. The I2C interface also enables rapid prototyping without hardware changes.

1ED3461(X3 Analog) version available, with active Miller clamp (clamp driver for external MOSFET), adjustable DESAT and Soft-off.

特征描述

  • Highly flexible EiceDRIVER™ Enhanced single channel isolated gate driver 1ED38xx family (X3 Digital family)
  • For use with 650 V/1200 V/1700 V/2300 V IGBTs, Si and SiC MOSFETs
  • 2300 V functional offset voltage capable for selected applications
  • ±6 A typical sinking and sourcing peak output current
  • 40 V absolute maximum output supply voltage
  • Separate source and sink outputs with two-level turn-off
  • Active Miller clamp
  • Precise and temperature compensated VCEsat detection (DESAT) with fault output
  • IGBT soft turn-off after desaturation detection
  • FLT and RDY status signaling to µController
  • Parameter adjustment from input side via I2C bus:
    • Undervoltage lockout (UVLO)
    • Active Miller clamp
    • DESAT protection
    • Soft turn off
    • Two level turn off
    • Over temperature shutdown

优势

  • Over-temperature shut down at 160 °C (±10 °C)
  • Tight IC-to-IC propagation delay matching (30 ns max.)
  • High common-mode transient immunity CMTI >200 kV/μs
  • Suitable for operation at high ambient temperature up to 125 °C
  • Small space-saving DSO-16 fine pitch wide-body package with large creepage distance (>8 mm)
  • UL 1577 VISO = 6.84 kV (rms) for 1 s, 5.7 kV (rms) for 1 min
  • Enable fast design cycles and thebest-in-class DESAT accuracy thanks to low external component count and the adjustable DESAT with Soft-off
  • IEC 60747-17/VDE 0884-11 with VIORM = 1767 V (peak, reinforced)
  • The precise threshold and timings, combined with UL 1577 and IEC 60747-17/VDE 0884-11 certifications enable superior application safety
  • Perfect fit for all applications requiring a reliable DESAT protection, benefiting from an active Miller clamp and preferring small PCB space requirements
Part No Typ. output current CLAMP Type Isolation Certification
1ED3830MC12M

±3 A

 CLAMP UL 1577 & VDE-11
1ED3860MC12M

±6 A

 CLAMP Driver UL 1577 & VDE-11
1ED3890MC12M

±9 A

 CLAMP Driver UL 1577 & VDE-11