型号TLC2254A-EP
品牌
分类精密运算放大器 (Vos<1mV)
描述增强型产品高级 Lincmos 轨到轨极低功耗运算放大器
相关操作
产品概述

参数

Number of channels 4
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.4
Vos (offset voltage at 25°C) (max) (mV) 0.85
GBW (typ) (MHz) 0.2
Features High Cload Drive
Slew rate (typ) (V/µs) 0.12
Rail-to-rail In to V-, Out
Offset drift (typ) (µV/°C) 0.5
Iq per channel (typ) (mA) 0.035
Vn at 1 kHz (typ) (nV√Hz) 19
CMRR (typ) (dB) 83
Rating HiRel Enhanced Product
Operating temperature range (°C) -40 to 125
Input bias current (max) (pA) 60
Iout (typ) (A) 0.008
Architecture CMOS
Input common mode headroom (to negative supply) (typ) (V) -0.3
Input common mode headroom (to positive supply) (typ) (V) -0.8
Output swing headroom (to negative supply) (typ) (V) 0.01
Output swing headroom (to positive supply) (typ) (V) -0.02
THD + N at 1 kHz (typ) (%) 0.2

封装 | 引脚 | 尺寸

SOIC (D) 14 51.9 mm² 8.65 x 6

特性

  • Controlled Baseline
    • One Assembly/Test Site, One Fabrication Site
  • Extended Temperature Performance of –40°C to 125°C
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product-Change Notification
  • Qualification Pedigree
  • ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 150 V (TLC2252/52A) and 100 V (TLC2254/54A) Using Machine Model (C = 200 pF, R = 0)
  • Output Swing Includes Both Supply Rails
  • Low Noise . . . 19 nV/Hz Typ at f = 1 kHz
  • Low Input Bias Current . . . 1 pA Typ
  • Fully Specified for Both Single-Supply and Split-Supply Operation
  • Very Low Power . . . 35 µA Per Channel Typ
  • Common-Mode Input Voltage Range Includes Negative Rail
  • Low Input Offset Voltage
    850 µV Max at TA = 25°C (TLC225xA)
  • Macromodel Included
  • Performance Upgrades for the TS27L2/L4 and TLC27L2/L4

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
Advanced LinCMOS is a trademark of Texas Instruments.

说明

The TLC2252 and TLC2254 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC225x family consumes only 35 µA of supply current per channel. This micropower operation makes them good choices for battery-powered applications. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. Looking at Figure 1, the TLC225x has a noise level of 19 nV/Hz at 1kHz; four times lower than competitive micropower solutions.

The TLC225x amplifiers, exhibiting high input impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC225xA family is available and has a maximum input offset voltage of 850 µV. This family is fully characterized at 5 V and ±5 V.

The TLC2252/4 also makes great upgrades to the TLC27L2/L4 or TS27L2/L4 in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage ranges, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.