型号LMH6655
品牌
分类高速运算放大器 (GBW ≥ 50MHz)
描述双通道、低功耗、250MHz、低噪声放大器
产品概述

参数

Architecture Voltage FB
Number of channels 2
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12
GBW (typ) (MHz) 250
BW at Acl (MHz) 250
Acl, min spec gain (V/V) 1
Slew rate (typ) (V/µs) 200
Vn at flatband (typ) (nV√Hz) 4.5
Vn at 1 kHz (typ) (nV√Hz) 4.5
Iq per channel (typ) (mA) 4.5
Vos (offset voltage at 25°C) (max) (mV) 3
Rail-to-rail In to V-
Rating Catalog
Operating temperature range (°C) -40 to 85
CMRR (typ) (dB) 90
Input bias current (max) (pA) 10000000
Offset drift (typ) (µV/°C) 6
Iout (typ) (mA) 186
2nd harmonic (dBc) 80
3rd harmonic (dBc) 85
Frequency of harmonic distortion measurement (MHz) 1

封装 | 引脚 | 尺寸

SOIC (D) 8 29.4 mm² 4.9 x 6
VSSOP (DGK) 8 14.7 mm² 3 x 4.9

特性

  • (VS = ±5 V, TJ = 25 °C, Typical
    Values Unless Specified)
  • Voltage Feedback Architecture
  • Unity Gain Bandwidth 250 MHz
  • Supply Voltage Range ±2.5V to ±6V
  • Slew Rate 200 V/µsec
  • Supply Current 4.5 mA/channel
  • Input Common Mode Voltage −5.15V to +3.7V
  • Output Voltage Swing (RL = 100 Ω) −3.6V to 3.4V
  • Input Voltage Noise 4.5 nV/√Hz
  • Input Current Noise 1.7 pA/√Hz
  • Settling Time to 0.01% 25 ns

说明

The LMH6654 and LMH6655 single and dual high speed voltage feedback amplifiers are designed to have unity-gain stable operation with a bandwidth of 250 MHz. They operate from ±2.5 V to ±6 V and each channel consumes only 4.5 mA. The amplifiers feature very low voltage noise and wide output swing to maximize signal-to-noise ratio, and possess a true single supply capability with input common mode voltage range extending 150 mV below negative rail and within 1.3 V of the positive rail. The high speed and low power combination of the LMH6654 and LMH6655 make these products an ideal choice for many portable, high speed applications where power is at a premium.

The LMH6654 and LMH6655 are built on TI’s Advance VIP10 (Vertically Integrated PNP) complementary bipolar process.

The LMH6654 is packaged in 5-Pin SOT-23 and 8-Pin SOIC. The LMH6655 is packaged in 8-Pin VSSOP (DGK) and 8-Pin SOIC.