首页 Texas Instruments(德州仪器) 高速运算放大器 (GBW ≥ 50MHz) LMH6672
型号LMH6672 |
品牌 |
分类高速运算放大器 (GBW ≥ 50MHz) |
描述双路、高输出电流、高速运算放大器 |
|
产品概述参数 Architecture | Voltage FB | Number of channels | 2 | Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 5 | Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 12 | GBW (typ) (MHz) | 180 | BW at Acl (MHz) | 90 | Acl, min spec gain (V/V) | 2 | Slew rate (typ) (V/µs) | 170 | Vn at flatband (typ) (nV√Hz) | 4.5 | Vn at 1 kHz (typ) (nV√Hz) | 4.5 | Iq per channel (typ) (mA) | 6.2 | Vos (offset voltage at 25°C) (max) (mV) | 5.5 | Rail-to-rail | In to V- | Features | Decompensated | Rating | Catalog | Operating temperature range (°C) | -40 to 150 | CMRR (typ) (dB) | 110 | Input bias current (max) (pA) | 14000000 | Offset drift (typ) (µV/°C) | 5 | Iout (typ) (mA) | 200 | 2nd harmonic (dBc) | 92 | 3rd harmonic (dBc) | 95 | Frequency of harmonic distortion measurement (MHz) | 1 |
封装 | 引脚 | 尺寸 HSOIC (DDA) | 8 | 29.4 mm² 4.9 x 6 | SOIC (D) | 8 | 29.4 mm² 4.9 x 6 |
特性 - High Output Drive
- 19.2 VPP Differential Output Voltage,
RL = 50 Ω - 9.6 VPP Single-ended Output Voltage,
RL = 25 Ω - High Output Current
- ±200 mA @ VO = 9 VPP, VS = 12 V
- Low Distortion
- 105 dB SFDR @ 100 kHz, VO = 8.4 VPP,
RL = 25 Ω - 98 dB SFDR @ 1MHz, VO = 2 VPP,
RL = 100 Ω - High Speed
- 90 MHz 3 dB Bandwidth (G = 2)
- 135 V/µs Slew Rate
- Low Noise
- 3.1 nV/√Hz: Input Noise Voltage
- 1.8 pA/√Hz: Input Noise Current
- Low Supply Current: 7.2mA/amp
- Single-supply Operation: 5 V to 12 V
- Stable for Gain of +2V/V or Higher
- Available in 8-pin SOIC and SO PowerPAD (DDA)
说明 The LMH6672 is a low cost, dual high speed op amp capable of driving signals to within 1 V of the power supply rails. It features the high output drive with low distortion required for the demanding application of a single supply xDSL line driver. When connected as a differential output driver, the LMH6672 can drive a 50-Ω load to 16.8 VPP swing with only −98 dBc distortion, fully supporting the peak upstream power levels for upstream full-rate ADSL. The LMH6672 is fully specified for operation with 5-V and 12-V supplies. Ideal for PCI modem cards and xDSL modems. |