型号THS4032-EP
品牌
分类高速运算放大器 (GBW ≥ 50MHz)
描述增强型产品 100MHz 低噪声高速放大器
相关操作
产品概述

参数

Architecture Voltage FB
Number of channels 2
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 30
GBW (typ) (MHz) 200
BW at Acl (MHz) 200
Acl, min spec gain (V/V) 1
Slew rate (typ) (V/µs) 100
Vn at flatband (typ) (nV√Hz) 1.6
Vn at 1 kHz (typ) (nV√Hz) 1.6
Iq per channel (typ) (mA) 8.5
Vos (offset voltage at 25°C) (max) (mV) 2
Rail-to-rail No
Rating HiRel Enhanced Product
Operating temperature range (°C) -55 to 125
CMRR (typ) (dB) 95
Input bias current (max) (pA) 6000000
Offset drift (typ) (µV/°C) 2
Iout (typ) (mA) 90
2nd harmonic (dBc) 72
3rd harmonic (dBc) 72
Frequency of harmonic distortion measurement (MHz) 1

封装 | 引脚 | 尺寸

HVSSOP (DGN) 8 14.7 mm² 3 x 4.9

特性

  • Ultralow 1.6-nV/Hz Voltage Noise
  • High Speed:
    • 100-MHz Bandwidth [G = 2 (-1), –3 dB]
    • 100-V/µs Slew Rate
  • Very Low Distortion
    • THD = –72 dBc (f = 1 MHz, RL = 150 )
    • THD = –90 dBc (f = 1 MHz, RL = 1 k)
  • Low 0.5-mV (Typ) Input Offset Voltage
  • 90-mA Output Current Drive (Typical)
  • ±5 V to ±15 V Typical Operation
  • Available in Standard SOIC, MSOP PowerPAD™, JG, or FK Package
  • Evaluation Module Available
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–55°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability

(1) Additional temperature ranges are available - contact factory
PowerPAD is a trademark of Texas Instruments.

说明

The THS4031 and THS4032 are ultralow-voltage noise, high-speed voltage feedback amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. The single amplifier THS4031 and the dual amplifier THS4032 offer very good ac performance with 100-MHz bandwidth (G = 2), 100-V/µs slew rate, and 60-ns settling time (0.1%). The THS4031 and THS4032 are unity gain stable with 275-MHz bandwidth. These amplifiers have a high drive capability of 90 mA and draw only 8.5-mA supply current per channel. With –90 dBc of total harmonic distortion (THD) at f = 1 MHz and a very low noise of 1.6 nV/Hz, the THS4031 and THS4032 are ideally suited for applications requiring low distortion and low noise such as buffering analog-to-digital converters.