型号LM10QML
品牌
分类通用运算放大器
描述获得 QML 认证的军用级、单路、45V、50kHz 运算放大器
相关操作
产品概述

参数

Number of channels 1
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 45
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 1.3
Rail-to-rail In to V-, Out
GBW (typ) (MHz) 0.05
Slew rate (typ) (V/µs) 0.2
Vos (offset voltage at 25°C) (max) (mV) 2
Iq per channel (typ) (mA) 0.27
Vn at 1 kHz (typ) (nV√Hz) 50
Rating Military
Operating temperature range (°C) -55 to 125
Offset drift (typ) (V/°C) 0.000002
Input bias current (max) (pA) 20000
CMRR (typ) (dB) 102
Iout (typ) (A) 0.02
Architecture Bipolar
Input common mode headroom (to negative supply) (typ) (V) 0
Input common mode headroom (to positive supply) (typ) (V) -0.8
Output swing headroom (to negative supply) (typ) (V) 0.02
Output swing headroom (to positive supply) (typ) (V) -0.02

封装 | 引脚 | 尺寸

TO-CAN (LMG) 8 83.612736 mm² 9.144 x 9.144

特性

  • Input Offset Voltage:  2.0 mV (max)
  • Input Offset Current: 0.7 nA (max)
  • Input Bias Current: 20 nA (max)
  • Reference Regulation: 0.1% (max)
  • Offset Voltage Drift: 2μV/°C
  • Reference Drift:  0.002%/°C

All trademarks are the property of their respective owners.

说明

The LM10 is a monolithic linear IC consisting of a precision reference, an adjustable reference buffer and an independent, high quality op amp.

The unit can operate from a total supply voltage as low as 1.1V or as high as 40V, drawing only 270μA. A complementary output stage swings within 15 mV of the supply terminals or will deliver ±20 mA output current with ±0.4V saturation. Reference output can be as low as 200 mV.

The circuit is recommended for portable equipment and is completely specified for operation from a single power cell. In contrast, high output-drive capability, both voltage and current, along with thermal overload protection, suggest it in demanding general-purpose applications.

The device is capable of operating in a floating mode, independent of fixed supplies. It can function as a remote comparator, signal conditioner, SCR controller or transmitter for analog signals, delivering the processed signal on the same line used to supply power. It is also suited for operation in a wide range of voltage- and current-regulator applications, from low voltages to several hundred volts, providing greater precision than existing ICs.