型号OPA725
品牌
分类通用运算放大器
描述单路、12V、20MHz 运算放大器
相关操作
产品概述

参数

Number of channels 1
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4
Rail-to-rail In to V-, Out
GBW (typ) (MHz) 20
Slew rate (typ) (V/µs) 30
Vos (offset voltage at 25°C) (max) (mV) 3
Iq per channel (typ) (mA) 4.3
Vn at 1 kHz (typ) (nV√Hz) 10
Rating Catalog
Operating temperature range (°C) -40 to 125
Offset drift (typ) (V/°C) 0.000004
Input bias current (max) (pA) 200
CMRR (typ) (dB) 94
Iout (typ) (A) 0.04
Architecture CMOS
Input common mode headroom (to negative supply) (typ) (V) 0
Input common mode headroom (to positive supply) (typ) (V) -2
Output swing headroom (to negative supply) (typ) (V) 0.1
Output swing headroom (to positive supply) (typ) (V) -0.1

封装 | 引脚 | 尺寸

SOIC (D) 8 29.4 mm² 4.9 x 6
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8

特性

  • BANDWIDTH: 20MHz
  • SLEW RATE: 30V/µs
  • FAST 16-Bit SETTLING TIME
  • LOW NOISE: 6nV/Hz (typ) at 100kHz
  • EXCELLENT CMRR, PSRR, and AOL
  • RAIL-TO-RAIL OUTPUT
  • CM RANGE INCLUDES GND
  • THD+N: 0.0003% (typ) at 1kHz
  • QUIESCENT CURRENT: 5.5mA/ch (max)
  • SUPPLY VOLTAGE: 4V to 12V
  • SHUTDOWN MODE (OPAx726): 6µA/ch
  • APPLICATIONS
    • OPTICAL NETWORKING
    • TRANSIMPEDANCE AMPLIFIERS
    • INTEGRATORS
    • ACTIVE FILTERS
    • A/D CONVERTER BUFFERS
    • I/V CONVERTER FOR DACs
    • PORTABLE AUDIO
    • PROCESS CONTROL
    • TEST EQUIPMENT

All trademarks are the property of their respective owners.

说明

The OPA725 and OPA726 series op amps use a state-of-the-art 12V analog CMOS process, and combine outstanding ac performance with low bias current and excellent CMRR, PSRR, and AOL. The 20MHz Gain-Bandwidth (GBW) Product is achieved by using a proprietary and patent-pending output stage design. These characteristics allow excellent 16-bit settling times for driving 16-bit Analog-to-Digital Converters (ADCs).

Excellent ac characteristics, such as 20MHz GBW, 30V/µs slew rate and 0.0003% THD+N make the OPA725 and OPA726 well-suited for communication, high-end audio, and active filter applications. With bias current of less than 200pA, they are well-suited for use as transimpedance (I/V-conversion) amplifiers for monitoring optical power in ONET applications.

The OPA725 and OPA726 op amps can be used in single-supply applications from 4V up to 12V, or dual-supply from ±2V to ±6V. The output swings to within 150mV of the rails, maximizing dynamic range. The shutdown versions (OPAx726) reduce the quiescent current to less than 6µA and feature a reference pin for easy shutdown operation with standard CMOS logic in dual supply applications.

The OPA725 (single) is available in SOT23-5 and SO-8 [ackages, and the OPA2725 (dual) is available in MSOP-8 (Q1 ’04) and SO-8 packages. The OPA726 (single with shutdown) is available in MSOP-8 and SO-8. The OPA2726 (dual with shutdown) is available in MSOP-10. All versions are specified for operation from –40°C to +125°C.