型号TLV2711
品牌
分类通用运算放大器
描述单路、10V、65kHz 运算放大器
相关操作
产品概述

参数

Number of channels 1
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 10
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.7
Rail-to-rail In to V-, Out
GBW (typ) (MHz) 0.065
Slew rate (typ) (V/µs) 0.025
Vos (offset voltage at 25°C) (max) (mV) 3
Iq per channel (typ) (mA) 0.013
Vn at 1 kHz (typ) (nV√Hz) 21
Rating Catalog
Operating temperature range (°C) -40 to 85, 0 to 70
Offset drift (typ) (V/°C) 0.0000005
Features High Cload Drive
Input bias current (max) (pA) 60
CMRR (typ) (dB) 83
Iout (typ) (A) 0.0005
Architecture CMOS
Input common mode headroom (to negative supply) (typ) (V) -0.3
Input common mode headroom (to positive supply) (typ) (V) -0.8
Output swing headroom (to negative supply) (typ) (V) 0.012
Output swing headroom (to positive supply) (typ) (V) -0.05

封装 | 引脚 | 尺寸

SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8

特性

  • Output Swing Includes Both Supply Rails
  • Low Noise...21 nV/Hz Typ at f = 1 kHz
  • Low Input Bias Current...1 pA Typ
  • Very Low Power...11 uA Per Channel Typ
  • Common-Mode Input Voltage Range Includes Negative Rail
  • Wide Supply Voltage Range
    2.7 V to 10 V
  • Available in the SOT-23 Package
  • Macromodel Included

    Advanced LinCMOS is a trademark of Texas Instruments.

说明

The TLV2711 is a single low-voltage operational amplifier available in the SOT-23 package. It consumes only 11 uA (typ) of supply current and is ideal for battery-power applications. Looking at Figure 1, the TLV2711 has a 3-V noise level of 21nV/Hz at 1 kHz; five times lower than competitive SOT-23 micropower solutions. The device exhibits rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV2711 is fully characterized at 3 V and 5 V and is optimized for low-voltage applications.

The TLV2711, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs).

With a total area of 5.6mm2, the SOT-23 package only requires one-third the board space of the standard 8-pin SOIC package. This ultra-small package allows designers to place single amplifiers very close to the signal source, minimizing noise pick-up from long PCB traces.