型号INA152
品牌
分类差分放大器
描述单电源差分放大器
产品概述

参数

Number of channels 1
Vs (min) (V) 2.7
Vs (max) (V) 20
CMRR (min) (dB) 80
Common-mode input low (min) (V) -20
Common-mode input high (max) (V) 18
Input offset (±) (max) (V) 0.0015
Iq (typ) (mA) 0.5
Slew rate (typ) (V/µs) 0.4
Voltage gain (min) (V/V) 1
Voltage gain (max) (V/V) 1
Small-signal bandwidth (typ) (Hz) 800000
Rating Catalog
Operating temperature range (°C) -40 to 85
Gain drift (max) (ppm/°C) 1
Gain error (±) (max) (%) 0.1

封装 | 引脚 | 尺寸

VSSOP (DGK) 8 14.7 mm² 3 x 4.9

特性

  • SWING: to Within 200mV of Either Output Rail
  • LOW OFFSET DRIFT: ±3uV/°C
  • LOW OFFSET VOLTAGE: ±250uV
  • HIGH CMR: 94dB
  • LOW GAIN ERROR: 0.01%
  • LOW GAIN ERROR DRIFT: 1ppm/°C
  • WIDE SUPPLY RANGE:
    Single: 2.7V to 20V
    Dual: ±1.35V to ±10V
  • MSOP-8 PACKAGE
  • APPLICATIONS
    • DIFFERENCE INPUT AMPLIFIER BUILDING BLOCK
    • UNITY-GAIN INVERTING AMPLIFIER
    • GAIN = 1/2
    • AMPLIFIER GAIN = 2 AMPLIFIER
    • SUMMING AMPLIFIER
    • SYNCHRONOUS DEMODULATOR
    • CURRENT AND DIFFERENTIAL LINE RECEIVER
    • VOLTAGE-CONTROLLED CURRENT SOURCE
    • BATTERY-POWERED SYSTEMS
    • LOW-COST AUTOMOTIVE INSTRUMEN-TATION

说明

The INA152 is a small (MSOP-8), low-power, unity-gain difference amplifier consisting of a CMOS op amp and a precision resistor network. The on-chip resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistor maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends to above the positive and negative rails and the output swings to within 50mV of either rail.

The difference amplifier is the foundation of many commonly used circuits. The INA152 provides precision circuit function without using an expensive precision network.

The INA152 is specified for operation over the extended industrial temperature range, x9640°C to +85°C.