型号TLC372M
品牌
分类比较器
描述低功耗 LinCMOS™ 双路比较器
产品概述

参数

Number of channels 2
Output type Open-collector, Open-drain
Propagation delay time (µs) 0.2
Vs (max) (V) 16
Vs (min) (V) 4
Vos (offset voltage at 25°C) (max) (mV) 5
Iq per channel (typ) (mA) 0.075
Input bias current (±) (max) (nA) 0.03
Rail-to-rail Out
Rating Military
Operating temperature range (°C) -55 to 125
VICR (max) (V) 15
VICR (min) (V) 0

封装 | 引脚 | 尺寸

CDIP (JG) 8 64.032 mm² 9.6 x 6.67
CFP (U) 10 139.36 mm² 21.44 x 6.5
LCCC (FK) 20 79.0321 mm² 8.89 x 8.89
SOIC (D) 8 29.4 mm² 4.9 x 6

特性

  • Single or Dual-Supply Operation
  • Wide Range of Supply Voltages 2 V to 18 V
  • Low Supply Current Drain 150 µA Typ at 5 V
  • Fast Response Time . . . 200 ns Typ for TTL-Level Input Step
  • Built-in ESD Protection
  • High Input Impedance . . . 1012 Ω Typ
  • Extremely Low Input Bias Current 5 pA Typ
  • Ultrastable Low Input Offset Voltage
  • Input Offset Voltage Change at Worst-Case Input Conditions Typically 0.23 µV/Month, Including the First 30 Days
  • Common-Mode Input Voltage Range Includes Ground
  • Output Compatible With TTL, MOS, and CMOS
  • Pin-Compatible With LM393

LinCMOS is a trademark of Texas Instruments Incorporated.
All other trademarks are the property of their respective owners.

说明

This device is fabricated using LinCMOS™ technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 2 V to 18 V. Each device features extremely high input impedance (typically greater than 1012Ω), allowing direct interfacing with high-impedance sources. The outputs are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships.

The TLC372 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 1000-V ESD rating using human body model testing. However, care should be exercised in handling this device as exposure to ESD may result in a degradation of the device parametric performance.

The TLC372C is characterized for operation from 0°C to 70°C. The TLC372I is characterized for operation from –40°C to 85°C. The TLC372M is characterized for operation over the full military temperature range of –55°C to 125°C. The TLC372Q is characterized for operation from –40°C to 125°C.